不锈钢新闻

不锈钢加工新闻

您当前的位置:主页 > 不锈钢新闻 > 不锈钢加工新闻 >

不锈钢加工过程中的注意事项

发布日期:2015-12-05 浏览次数:文章来源:未知 作者:北京不锈钢

导读: 北京怡丰源达不锈钢制品厂是一家专门生产和销售不锈钢加工的厂家,主营业务:北京不锈钢制品加工、北京非标加工、北京铁制品加工、北京不锈钢制品。

     北京怡丰源达不锈钢制品厂是一家专门生产和销售不锈钢加工的厂家,主营业务:北京不锈钢制品加工、北京非标加工、北京铁制品加工、北京不锈钢制品。下面北京不锈钢制品加工为您分享下不锈钢加工的过程中应注意的问题:
      其实对于不锈钢的加工,不少城市都有这样的加工中心或者是专门的加工工厂,但是选择不同的加工方,所得到的产品的效果是不一样的,有的经验比较足,师傅的技术能力比较强,因而加工出来的效果是能够令人满意的,但是也有一些加工工厂对于不锈钢产品的加工经验比较缺乏,难以令人满意,如此不但是浪费了时间,同时也是浪费了材料和金钱。因此,对于加工不锈钢产品,要注意的是要选择好的加工厂家,在选择之前除了沟通和交流之外,还需要看对方的实力如何,如若没有成套的加工设备或者是熟练的工人,那么是很难把不锈钢加工好的。

具体常见的注意事项:
  1.因为在加工的过程中刀具表面与其他非金属或者金属结合成合金,使刀具更加容易生锈,我觉得可以给他加个防氧化膜或者抗氧化膜。
  2.在不锈钢焊接中应该注意焊机电流的调节大小。
  3.冷却液应该用水溶性切削液,半合成的,冷却、润滑都好。
  4.不锈钢虽然硬但是它也棉,就是软的意思。上述的车法都会搅刀.要不锈钢加工车刀要磨好.车刀正角要大于5这样子吃刀量可以打好多,效率会高出来.一般持刀单边3MM。
  5.因为不锈钢容易变形,钻孔和攻螺纹很是困难,所以要防止过热,在加工面喷油。
  6.不锈钢加工转速应该慢点,进给率慢点,一般线速不超过130。
       7.车床不锈钢加工设和用YT8的车道。

    另外,加工不锈钢也是要考虑到成本的问题,很多产品其实都是比较难一次性的成型的,因而在加工之前就需要考虑到材料的消耗问题,这个除了需要多准备一些钢材之外,在加工预算方面也是要充足一些,以免因为预算的问题而导致加工工作的不顺利。不过总得来说,加工不锈钢选择好的加工厂家是很重要的,它可以为你呈现一个令你满意的产品外形,同时也可以提高效率,这一点很重要。
   一、制品类 :承制简洁繁杂的多元化制品和造型各异的多样化钣金加工。如,不锈钢工作台,高档不锈钢酒店用品、家具家私、不锈钢花盆、不锈钢消毒设备、不锈钢配电箱、不锈钢推车、不锈钢垃圾箱、不锈钢家具制品等制品。
   二、加工类:数控机床(刨、剪、折、冲)高精度机加工业务。

  通过以上介绍的,希望能大家能够在以后的加工过程中能够注意以上的问题,北京怡丰源达不锈钢加工厂真诚的欢迎大家来我们厂考察。文章来源:(http://www.yfyd360.com)

Beijing Yi Feng Yuan Da stainless steel products factory is a specialized production and sales of stainless steel processing factory, the main business: Beijing stainless steel products processing, Beijing non standard processing, Beijing iron products processing, Beijing stainless steel products. Beijing stainless steel products processing for you to share in the process of stainless steel processing should pay attention to the problem:
In fact, for the stainless steel, many cities have such a machining center or specialized processing plants, but choose different processing, the effect of the product is not the same, some experience is relatively strong, so the effect is satisfactory, but there are some processing plants for stainless steel products processing experience is relatively lack, so not satisfactory, but also a waste of time, but also a waste of material and money. Therefore, for the processing of stainless steel products, it is to pay attention to choose a good processing factory, in addition to communication and communication, but also need to see how the strength of the other side, if not complete sets of processing equipment or skilled workers, then it is difficult to add stainless steel.
Specific attention matters:
1 because in the process of machining the surface of the tool and other non metal or metal into the alloy, so that the tool is more prone to rust, I think you can give him an anti oxidation film or anti oxidation film.
2 in the welding of stainless steel should pay attention to the size of the welding current.
3 coolant should be dissolved in water, semi synthetic, cooling, lubrication is good.
4 stainless steel although hard but it also cotton, that is, the meaning of soft. The car will be mixing blade. Stainless steel processing tool to wear well. Turning angle is greater than 5 like this depth can play a lot of, efficiency will be higher. General to unilateral knife 3mm.
5 because the stainless steel is easy to deformation, drilling and tapping is difficult, so to prevent overheating in the process of injection.
6 stainless steel processing speed should slow down, slow down the feed rate, the general speed of not more than 130.
7 lathe stainless steel processing and YT8 of the drive.
In addition, the processing of stainless steel is also to take into account the cost of the problem, many products are actually more difficult one time, so in the process before the need to consider the material consumption, this in addition to the need to prepare some of the steel, in the processing of the budget is also to be adequate, so as not to cause the problem caused by the processing work is not smooth. But generally speaking, the processing of stainless steel selection of good processing factory is very important, it can be for you to present a satisfactory product appearance, but also can improve the efficiency, this is very important.
A variety of products: sheet metal processing, manufacturing complex products and simple diversification of different shapes. For example, stainless steel table, high-grade stainless steel hotel supplies, furniture, stainless steel pot, stainless steel sterilizing equipment, stainless steel distribution box, stainless steel cart, stainless steel bins, stainless steel furniture products and other products.
Two, processing type: numerical control machine tool (plane, cutting, folding, punching) high precision machining business.
Through the above introduction, hope to everyone can process in the future to pay attention to the above problems, Beijing Yi Feng Yuan Da stainless steel processing factory sincerely welcome to visit our factory.

热点推荐

  • 不锈钢广告牌-2
  • 不锈钢楼梯扶手-1
  • 不锈钢广告牌-2
  • 不锈钢感应门3
  • 不锈钢感应门2
  • 不锈钢广告牌-3
  • 相关阅读

  • 中厚板切割方法中数控切割如何来避免工件变
  • 全自动激光切管材加工机的七种优点你了解吗
  • 不锈钢激光切割技术在装饰工程方面的应用
  • 激光切割加工出现毛刺的原因和解决方法总结
  • 激光切割机实现亮面切割的六个方法
  • 厂家介绍切割机加工板材的技巧
  • 不锈钢新闻   NEWS
    联系我们   Contact Us